Added config file for apt::cacher.

apt/files/apt-cacher.conf

@@ -0,0 +1,163 @@
+#################################################################
+# This is the config file for apt-cacher. On most Debian systems
+# you can safely leave the defaults alone.
+#################################################################
+
+# cache_dir is used to set the location of the local cache. This can
+# become quite large, so make sure it is somewhere with plenty of space.
+cache_dir=/var/cache/apt-cacher
+
+# The email address of the administrator is displayed in the info page
+# and traffic reports.
+admin_email=root@localhost
+
+# For the daemon startup settings please edit the file /etc/default/apt-cacher.
+
+# Daemon port setting, only useful in stand-alone mode. You need to run the
+# daemon as root to use privileged ports (<1024).
+daemon_port=3142
+
+# optional settings, user and group to run the daemon as. Make sure they have
+# sufficient permissions on the cache and log directories. Comment the settings
+# to run apt-cacher as the native user.
+group=www-data
+user=www-data
+
+# optional setting, binds the listening daemon to specified IP(s). Use IP
+# ranges for more advanced configuration, see below.
+# daemon_addr=localhost
+
+# If your apt-cacher machine is directly exposed to the Internet and you are
+# worried about unauthorised machines fetching packages through it, you can
+# specify a list of IPv4 addresses which are allowed to use it and another
+# list of IPv4 addresses which aren't.
+# Localhost (127.0.0.1) is always allowed. Other addresses must be matched
+# by allowed_hosts and not by denied_hosts to be permitted to use the cache.
+# Setting allowed_hosts to "*" means "allow all".
+# Otherwise the format is a comma-separated list containing addresses,
+# optionally with masks (like 10.0.0.0/22), or ranges of addresses (two
+# addresses separated by a hyphen, no masks, like '192.168.0.3-192.168.0.56').
+allowed_hosts=*
+denied_hosts=
+
+# And similarly for IPv6 with allowed_hosts_6 and denied_hosts_6.
+# Note that IPv4-mapped IPv6 addresses (::ffff:w.x.y.z) are truncated to
+# w.x.y.z and are handled as IPv4.
+allowed_hosts_6=fec0::/16
+denied_hosts_6=
+
+# This thing can be done by Apache but is much simpler here - limit access to
+# Debian mirrors based on server names in the URLs
+#allowed_locations=ftp.uni-kl.de,ftp.nerim.net,debian.tu-bs.de
+
+# Apt-cacher can generate usage reports every 24 hours if you set this
+# directive to 1. You can view the reports in a web browser by pointing
+# to your cache machine with '/apt-cacher/report' on the end, like this:
+#      http://yourcache.example.com/apt-cacher/report
+# Generating reports is very fast even with many thousands of logfile
+# lines, so you can safely turn this on without creating much 
+# additional system load.
+generate_reports=1
+
+# Apt-cacher can clean up its cache directory every 24 hours if you set
+# this directive to 1. Cleaning the cache can take some time to run
+# (generally in the order of a few minutes) and removes all package
+# files that are not mentioned in any existing 'Packages' lists. This
+# has the effect of deleting packages that have been superseded by an
+# updated 'Packages' list.
+clean_cache=1
+
+# Apt-cacher can be used in offline mode which just uses files already cached,
+# but doesn't make any new outgoing connections by setting this to 1.
+offline_mode=0
+
+# The directory to use for apt-cacher access and error logs.
+# The access log records every request in the format:
+# date-time|client ip address|HIT/MISS/EXPIRED|object size|object name
+# The error log is slightly more free-form, and is also used for debug
+# messages if debug mode is turned on.
+# Note that the old 'logfile' and 'errorfile' directives are
+# deprecated: if you set them explicitly they will be honoured, but it's
+# better to just get rid of them from old config files.
+logdir=/var/log/apt-cacher
+
+# apt-cacher can use different methods to decide whether package lists need to
+# be updated,
+# A) looking at the age of the cached files
+# B) getting HTTP header from server and comparing that with cached data. This
+# method is more reliable and avoids desynchronisation of data and index files
+# but needs to transfer few bytes from the server every time somebody requests
+# the files ("apt-get update")
+# Set the following value to the maximum age (in hours) for method A or to 0
+# for method B
+expire_hours=0
+
+# Apt-cacher can pass all its requests to an external http proxy like
+# Squid, which could be very useful if you are using an ISP that blocks
+# port 80 and requires all web traffic to go through its proxy. The
+# format is 'hostname:port', eg: 'proxy.example.com:8080'.
+#http_proxy=proxy.example.com:8080
+
+# Use of an external proxy can be turned on or off with this flag.
+# Value should be either 0 (off) or 1 (on).
+use_proxy=0
+
+# External http proxy sometimes need authentication to get full access. The
+# format is 'username:password'.
+#http_proxy_auth=proxyuser:proxypass
+
+# Use of external proxy authentication can be turned on or off with this flag.
+# Value should be either 0 (off) or 1 (on).
+use_proxy_auth=0
+
+# This sets the interface to use for the upstream connection.
+# Specify an interface name, an IP address or a host name.
+# If unset, the default route is used.
+#interface=
+
+# Rate limiting sets the maximum bandwidth in bytes per second to use
+# for fetching packages. Syntax is fully defined in 'man wget'.
+# Use 'k' or 'm' to use kilobytes or megabytes / second: eg, 'limit=25k'.
+# Use 0 or a negative value for no rate limiting.
+limit=0
+
+# Debug mode makes apt-cacher spew a lot of extra debug junk to the
+# error log (whose location is defined with the 'logdir' directive).
+# Leave this off unless you need it, or your error log will get very
+# big. Acceptable values are 0 or 1.
+debug=0
+
+# To enable data checksumming, install libberkeleydb-perl and set this option
+# to 1. Then wait until the Packages/Sources files have been refreshed once
+# (and so the database has been built up). You can also nuke them in the cache
+# to trigger the update.  
+# checksum=1
+
+# Print a 410 (Gone) HTTP message with the specified text when accessed via
+# CGI. Useful to tell users to adapt their sources.list files when the
+# apt-cacher server is being relocated (via apt-get's error messages while
+# running "update")
+#cgi_advise_to_use = Please use http://cacheserver:3142/ as apt-cacher access URL
+#cgi_advise_to_use = Server relocated. To change sources.list, run perl -pe "s,/apt-cacher\??,:3142," -i /etc/apt/sources.list
+
+# Server mapping - this allows to hide real server names behind virtual paths
+# that appear in the access URL. This method is known from apt-proxy. This is
+# also the only method to use FTP access to the target hosts. The syntax is
+# simple, the part of the beginning to replace, followed by a list of mirror
+# urls, all space separated. Multiple profile are separated by semicolons
+# Note that you need to specify all target servers in the allowed_locations
+# options if you make use of it. Also note that the paths should not overlap
+# each other. FTP access method not supported yet, maybe in the future.
+# path_map = debian ftp.uni-kl.de/pub/linux/debian ftp2.de.debian.org/debian ; ubuntu archive.ubuntu.com/ubuntu ; security security.debian.org/debian-security ftp2.de.debian.org/debian-security
+
+# Permitted package files - this is a perl regular expression which matches all
+# package-type files (files that are uniquely identified by their filename). 
+# The default is: 
+package_files_regexp = (?:\.deb|\.rpm|\.dsc|\.tar\.gz|\.diff\.gz|\.udeb|index\.db-.+\.gz|\.jigdo|\.template|linux)$
+
+# Permitted Index files - this is the perl regular expression which matches all
+# index-type files (files that are uniquely identified by their full path and
+# need to be checked for freshness). 
+#The default is:
+#index_files_regexp = (?:Index|Packages\.gz|Packages\.bz2|Release|Release\.gpg|Sources\.gz|Sources\.bz2|Contents-.+\.gz|pkglist.*\.bz2|release|release\..*|srclist.*\.bz2|Translation-.+\.bz2)$
+

apt/manifests/init.pp

@@ -30,6 +30,16 @@ class apt::cacher {
         require => Package["apt-cacher"],
     }
 
+    file { "/etc/apt-cacher/apt-cacher.conf":
+        ensure => present,
+        source => [ "puppet:///files/apt/apt-cacher.conf",
+                    "puppet:///apt/apt-cacher.conf", ],
+        mode   => 0644,
+        owner  => root,
+        group  => root,
+        notify => Service["apt-cacher"],
+    }
+
     service { "apt-cacher":
         ensure  => running,
         enable  => true,